Exness Charges Explained

Opening block
– Who this is for: Traders and investors who use Exness or consider opening an Exness account and need a clear, actionable breakdown of all charges.
– What this solves (2 sentences): Show exactly which fees you will pay when you trade or move money with Exness. Show where costs come from, how they differ by account and asset, and how to estimate total trading cost so you can compare brokers and manage P&L.

You trade. You need predictable costs. This guide lists every fee that will hit your P&L or cash balance. Check spreads (the bid/ask gap), commissions, swaps (overnight financing), and currency conversion charges. Compare five account tiers, with minimum deposits and commission rules. Use the worked example to calculate a real trade cost and run numbers through the Exness Trading Calculator. Avoid common mistakes that add $10–$50 or more in third-party bank fees. Pick the right account with the decision rules provided. No fluff. No hidden items. Follow the steps and estimate your full round-turn cost before you place a large trade.

Quick Answer / TL;DR
– If you want low spreads without commission → use Standard or Standard Cent (min deposit $100); expect spread-only pricing.
– If you want active-trader pricing → use Raw Spread or Zero: commission typically $3.5 per side ($7 round turn) or raw commissions from $0.40–$7.00 per standard lot depending on account and asset.
– Non-trading fees: internal deposit and withdrawal fees = $0; inactivity fee = $0; watch for currency-conversion markup and third-party processor fees.
– Estimate cost before you trade with the Exness Trading Calculator: include spread (pips × $ per pip), commission ($ per round turn), and swap (per night).

Exness Pricing Components — 4 fee types

Define the four fee buckets you must include in cost calculations. Use the numbers below to run a quick mental check before you take risk.

Spreads — the difference between bid and ask (the market entry gap). Expect spreads quoted in pips. Example: a 0.5 pip spread on EUR/USD costs roughly $5 on 1 standard lot. Use this conversion: 1 standard lot = 100,000 units; 1 pip on EUR/USD ≈ $10 per standard lot. Multiply pip spread × pip value × lots to get the spread cost.

Commissions — direct per-trade charges on some accounts. Apply on Raw Spread and Zero accounts most commonly. Typical benchmark: $3.5 per side = $7 per round turn for many instruments. Raw-account commissions can range between $0.40 and $7.00 per 1.0 standard round lot depending on asset and account tier. Add the per-side commission times 2 for round-turn or use per-lot flat fees where listed.

Swap / overnight financing — interest charged for positions held past the daily rollover. Swaps are instrument-specific and can be positive or negative. Example: a swap of -0.5 pips per night on a standard lot equals about -$5 per night. Multiply nights held × swap-per-night to estimate holding cost. Check instrument swap short/long values in the platform.

Currency conversion fee — applies when deposits, withdrawals, or trading involves a currency different from your account base. Exness uses the liquidity-provider exchange rate plus a markup. Typical markups run around 0.1%–0.5%, depending on provider and route. Example: converting €1,000 with a 0.3% markup adds €3 in hidden cost. Include conversion markup when funding, trading instruments denominated in other currencies, and when withdrawing.

Watch out for: Spread widenings around news, low-liquidity hours, or thin instruments. Check live spread at order-open, not just averages.

Account Types and Fee Differences — 5 account tiers

List the five primary account types and how fees change across them. Use the figures to choose the right pricing model.

Exness offers five main retail tiers: Standard, Standard Cent, Pro, Raw Spread, and Zero. Typical minimum deposits: Standard and Standard Cent often start at $100; Pro, Raw Spread, and Zero often require around $1,000 as a guideline. Standard Cent mirrors Standard but trades in micro/cent units, where 1 micro lot = 1,000 units and 1 standard lot = 100,000 units.

Which accounts charge commission:
– Standard & Standard Cent: spread-only. No per-side commission.
– Pro: usually spread-only or low-commission depending on instrument.
– Raw Spread & Zero: commission applies. Many instruments show $3.5 per side ($7 round-turn) as the common commission. Some assets and volume tiers show commissions as low as $0.40 per standard lot.

Volume discounts and tiers:
– Zero account is structured to favor high volume. Expect deeper commission reductions at higher monthly volumes; commissions can fall from $7 to below $1 per lot on some assets.
– Raw Spread offers raw spreads from around 0.0–0.5 pips on major FX pairs plus commission. Typical EUR/USD raw spread could be 0.0–0.3 pips.

Practical guidance:
– If you trade 1–5 lots per month and hold intraday, Standard may cost less due to no commission and no $1,000 minimum. Example: a 1.5 pip average spread on Standard costs $15 per standard lot. If Raw cuts spread by 1.0 pip but adds $7 commission, your break-even depends on trade size and frequency.
– If you trade >10 lots/month, switch to Raw/Zero to amortize commissions. Example: saving 1.0 pip on a 10-lot monthly volume saves $100; that offsets a $7 commission per round-turn after a small number of trades.

Watch out for: Minimum deposit differences ($100 vs $1,000) and volatility in spread vs commission tradeoffs. Test with 1 lot and 10 lots to spot the cross-over point.

Comparison table — account tiers and quick fee snapshot

Deposits, Withdrawals, and Non-trading Fees — 0 internal fees

Cover non-trading charges and third-party costs. Use precise numbers to set expectations.

Deposits — Exness generally does not charge internal deposit fees. Supported methods include bank wire, credit/debit cards, and e-wallets. Expect $0 charged by the broker on deposits for the listed channels. Check your payment provider: some e-wallets may charge 0.5%–2.5% on payment routes.

Withdrawals — Exness typically charges $0 for withdrawals via supported channels. The broker reports no internal withdrawal fee for most methods. Remember intermediary banks or payment processors can add fees. Expect third-party bank fees in the range of $10–$50 on international wires.

Inactivity and monthly fees — Exness does not charge inactivity fees. Expect $0 monthly platform or account maintenance charges. You will not see recurring broker fees on dormant accounts from Exness itself.

Currency conversion and wires — Exness uses liquidity-provider exchange rates plus a markup. Typical conversion markup ranges from 0.1% to 0.5%. Example: convert $10,000 at 0.2% markup and you pay $20 in conversion cost. The broker commonly reports no explicit international wire fee, but intermediary bank routing can add $10, $20, or up to $50 depending on banks and corridors.

Watch out for: Third-party processor fees. Avoid switching payment providers between deposit and withdrawal to reduce additional fees. Expect a $10–$50 range on incoming/outgoing wires and occasional fixed e-wallet charges.

Calculating Your Trading Costs — 3-step example

Show the exact steps and numbers to compute a full trade cost. Use the Exness Trading Calculator to verify.

Step 1 — Spread cost example:
– Trade: 1 standard lot EUR/USD (100,000 units).
– Spread: 0.5 pips.
– Pip value: ≈ $10 per standard lot.
– Spread cost = 0.5 pips × $10 = $5.

Step 2 — Commission example:
– Account: Raw/Zero.
– Commission: $3.5 per side typical.
– Round-turn commission = $3.5 × 2 = $7.
– Add commission to spread: $5 + $7 = $12 total on entry and exit.

Step 3 — Swap and conversion:
– Swap: -0.5 pips per night on this pair.
– Swap cost per night = 0.5 pips × $10 = $5.
– Holding time: 3 nights → swap total = $5 × 3 = $15 (negative).
– Currency conversion: convert €1,000 to USD with 0.3% markup → cost = €3 (≈ $3).
– Add conversion: $12 + $15 + $3 = $30 total cost impact for this trade and hold time.

Use the Exness Trading Calculator:
– Input lot size, instrument, direction, and estimated spread.
– Enter commission per side or per lot where applicable.
– Enter expected nights to calculate swap totals.
– The calculator uses previous-day average spreads; check live quote for precise entry cost.

Quick calculation checklist:
1. Lot size (e.g., 1.0 = 100,000 units).
2. Pip value (e.g., $10 for EUR/USD standard lot).
3. Spread in pips (e.g., 0.5 pips).
4. Commission per side or per lot (e.g., $3.5).
5. Swap per night and nights held (e.g., -0.5 pips × 3 nights).
6. Currency conversion markup (e.g., 0.3% × converted amount).

Watch out for: Calculators use average spreads. Live spreads can jump to 2×–5× typical levels during news or low liquidity. Validate with a small live order.

Common Pitfalls and 5 Cost-saving Tactics

Avoid mistakes that silently inflate costs. Apply the tactics and save real money.

Pitfall — ignoring account type vs trading style:
– Example: you pay a $7 commission on a 3-pip spread, but a 1.5-pip spread/no-commission account might cost less for small positions. Run the math for your typical trade size, e.g., 0.1 lot vs 1.0 lot.

Tip 1 — Match base currency to funding currency:
– Fund an account in the currency you use most. Save typical conversion markups of 0.1%–0.5%. Example: funding $10,000 and avoiding 0.3% conversion saves $30.

Tip 2 — Use Raw/Zero if you trade high volume:
– Trade >10 lots/month to amortize commissions. Example: saving 1.0 pip per lot at 10 lots equals $100 saved versus spread-only. Commission of $7 per round-turn is covered after a small number of trades.

Tip 3 — Use same payment provider for deposit and withdrawal:
– Keep the route identical to avoid extra routing fees. Example: bank A charges $20 for incoming wire; bank B charges $30. Switching can cost $10 per transfer.

Tip 4 — Avoid overnight holds on highly leveraged positions when swaps are adverse:
– Swap of -$5 per night erodes $35 in 7 nights. If your daily expected intraday profit is $5, a 7-night hold can wipe gains.

Tip 5 — Test in small lots before scaling:
– Open a 0.01 or 0.1 lot live trade and confirm real spread, slippage, commission, and withdrawal timings. Count actual charges over 5 trades to verify calculator assumptions.

Watch out for: High-frequency scalpers trading sub-pip strategies. They need ultra-low spreads and predictable commissions. One unexpected $2 variation in spread over 100 trades adds $200 in cost.

Regulatory and Transparency Details — 2 registration numbers

Explain who runs the service and where to verify fee disclosures. Check these numbers before you rely on pricing claims.

Entity details:
– Exness (SC) Ltd is a Securities Dealer registered in Seychelles with registration number 8423606-1. It operates under Financial Services Authority licence SD025. Use these numbers to confirm the entity and jurisdiction.

Transparency and where to confirm fees:
– Check instrument-specific commission tables and swap rates on the platform and in the Exness Trading Calculator. The calculator lists spread cost based on previous-day averages and shows commission and swap short/long values. Look up commission ranges per asset; raw commissions vary from $0.40 to $7.00 per standard round lot.

Audit and reporting notes:
– Commission structures can change by asset or client region. Download the instrument fee schedule or export trade reports from your account. Run a sample 1-lot trade and a 10-lot trade to see live costs. Record deposit and withdrawal timestamps and any third-party fees seen.

Practical rule: Always confirm live spread and commission in the terminal just before you trade. Check:
– Spread in quotes at order-open.
– Commission shown in order ticket.
– Swap rates on the instrument specification page.

Watch out for: Some promotional pricing and volume discounts require minimum monthly volume to apply. Verify the exact threshold before relying on a lower commission.

Closing checklist and final steps

• Check your account base currency and set it to your primary funding currency to avoid conversion markups of 0.1%–0.5%.
• Compare Standard vs Raw/Zero using your average trade size and number of trades. Use the table above and the Trading Calculator to test break-even points for 1 lot, 10 lots, and 100 lots.
• Test a small live trade: use 0.01 or 0.1 lots to confirm real spreads and slippage. Observe commission and swap on the live ticket.
• Track deposit and withdrawal fees: expect $0 from the broker, but budget $10–$50 for intermediary bank or processor fees.
• Re-run these cost checks each quarter or after any fee policy update.

You now have the numbers and steps. Calculate full round-turn cost before you trade. Compare accounts by plugging your typical lot size, spread, commission, swap, and conversion markup into the Exness Trading Calculator. Skip surprises. Trade with a clear P&L map.