Top 6 TradingView 対応ブローカー海外

Opening block
You trade from Japan or elsewhere and want to place live orders directly from TradingView. You need clarity on which overseas brokers plug into TradingView. This guide lists six brokers that integrate with TradingView for FX, stocks, and CFDs. Learn fees, execution, instruments, and account gates. Compare spreads, commissions, minimum deposits, latency, and market coverage. Skip trial-and-error. Check specific numbers like 0.0 pip spreads, $3.50 commissions, 70+ FX pairs, 30+ exchanges, and $2,000 minimums. Read the TL;DR first. Then dive into the broker breakdowns to match your account size, asset mix, and risk tolerance.

Quick Answer / TL;DR
If you want low spreads for FX scalping → Pepperstone (raw spreads from 0.0 pip + low commission).
If you want deep global markets (stocks + options) → Interactive Brokers (many exchanges, low per-share fees).
If you prefer a simple integrated CFD setup → IG (spreads from ~0.6 pips on majors).
If you need robust FX APIs with straightforward setup → OANDA (stable REST and streaming APIs).
Use the broker’s native TradingView bridge for direct order routing. Check KYC time (1–3 business days), funding limits, and instrument availability by region. Test with small sizes (1–10 micro lots or 1–100 shares) before scaling.

What We Looked For
Integration depth — Whether the broker supports full TradingView order routing or only alerts. Full routing reduces steps and manual entry time by 1–3 actions.
Costs — Spreads, commissions, and rollover/financing rates. Compare 0.0–1.2 pip spreads and $0.25–$5.00 per trade commissions.
Market coverage — FX pairs, global equities, CFDs, futures. Check counts: 70+ FX pairs, 10,000+ CFDs, 30+ exchanges.
Execution speed & reliability — Typical latency and slippage metrics. Expect <100 ms for top ECNs, <200 ms for streaming APIs, and occasional 1–5 pip slippage in thin markets.
Account requirements — Minimum deposit, verification time, and regional restrictions. Look for $0–$100 entry tiers up to $2,000+ for premium accounts. Verify accounts in 1–5 business days.

1. Pepperstone — Low-cost raw spreads for active FX traders

Pepperstone is popular for raw-spread (ECN-style) accounts that connect directly to TradingView. Use the Razor account for scalping. Expect spreads from 0.0–0.3 pips on EUR/USD during peak liquidity. Commission example: around $3.50 per side per standard lot, which equals roughly $7.00 round-turn per 100k. Minimum deposit varies by region; many traders fund with $0–$100 to start. Execution often routes to major ECNs with latency commonly under 100 ms to liquidity hubs.

Use Pepperstone when you need sub-1-pip pricing and fast fills. Razor accounts add commissions, so calculate cost per round-turn. Test during your active hours; EUR/USD spreads widen outside peak times to 0.5–1.2 pips. Swap (overnight) rates vary by instrument. Pay attention to rollover costs, which can be a few tenths to several percentage points annually.

Best for: Scalpers and active FX traders who need sub-1-pip spreads.
Skip if: You trade tiny sizes and can’t absorb per-trade commissions.
Key points:
– Spreads: 0.0–0.3 pips on EUR/USD during high liquidity.
– Commission: ~$3.50 per side per standard lot (≈ $7.00 round-turn per 100k).
– Instruments: 70+ FX pairs, indices, and metals (CFDs).
– Execution latency: often <100 ms to ECNs.
– Minimum deposit: commonly $0–$100 depending on region.
Watch out for: Raw accounts add commissions and may increase overnight funding costs by 0.1%–3.0% annualized for some pairs.

2. OANDA — Stable API access and straightforward accounts for retail FX

OANDA focuses on FX and CFD retail trading with a stable API and direct TradingView connectivity. Use OANDA to link TradingView alerts to REST or streaming endpoints. Typical spreads on EUR/USD sit around 0.6–1.2 pips for retail accounts. Leverage caps vary by region; retail leverage often goes up to 1:30 for major FX pairs where allowed. Deposit options span $0 to $50,000 tiers depending on verification and institutional access.

Connect TradingView alerts for automated entries and exits. Expect API order latency often under 200 ms for basic REST calls and under 100 ms for streaming orders in good network conditions. OANDA supports 70+ FX crosses and multiple funding methods. Verification commonly takes 1–3 business days for retail accounts.

Best for: Retail FX traders and algo users needing stable API access.
Skip if: You need direct stock exchange access; OANDA focuses on FX/CFDs.
Key points:
– Typical EUR/USD spread: ~0.6–1.2 pips on retail accounts.
– Leverage: up to 1:30 for majors (region-dependent).
– Pairs available: 70+ FX crosses.
– API latency: often <200 ms for REST, <100 ms for streaming.
– Verification time: commonly 1–3 business days.
Watch out for: Spreads widen during thin liquidity to 1.5–3.0 pips for some crosses.

3. Forex.com (Gain Capital) — Broad FX offering with TradingView bridge

Forex.com pairs familiar retail FX execution with TradingView connectivity. Use standard accounts for spread-only trading or active trader/commission accounts for ECN-style pricing. Standard spreads on EUR/USD often start near 0.8 pips. Active trader accounts offer spreads from 0.2 pips plus commissions commonly near $5.00 round-turn per 100k. Minimum deposit depends on jurisdiction, from $0 to promotional $2,000 tiers.

Use TradingView for both manual chart orders and automated alert-driven strategies. Execution follows a market/ECN-style model with variable spreads. Latency frequently sits in the 50–150 ms range for retail routes. Margin rules and commission structures shift by account type.

Best for: Retail traders seeking balanced costs and easy TradingView linking.
Skip if: You require institutional ECN pricing or extremely high leverage.
Key points:
– Standard EUR/USD spreads: from ~0.8 pips.
– Active trader spreads: from ~0.2 pips + ~$5.00 round-turn per 100k.
– Minimum deposit: $0–$2,000 depending on region and promos.
– Execution latency: commonly 50–150 ms.
– Instruments: FX, indices, metals, and select CFDs.
Watch out for: Commission accounts may require higher minimums and different margin rules.

4. IG — Wide CFD and FX coverage for technical traders

IG provides a broad catalog of CFDs, FX, commodities, and indices with TradingView integration. Trade multiple asset classes from one account and route orders from TradingView charts. Typical EUR/USD spreads start around 0.6 pips. Financing (swap) rates depend on base rates plus a broker margin; example: base rate + 2.5% for overnight financing. Minimum deposit varies widely by region from $0 to about $300 for certain account types.

Use IG when you want one account for FX, CFDs, and commodities. IG lists over 10,000 instruments including thousands of CFDs. Spreads and commission models vary; many retail accounts use spread-only pricing. TradingView routing works natively for supported accounts. Execution quality often shows slippage under 1 pip on majors during active hours.

Best for: Multi-asset traders who want unified access via TradingView.
Skip if: You need absolute lowest FX spreads for micro scalping.
Key points:
– EUR/USD spreads: from ~0.6 pips.
– Instruments: 10,000+ instruments including thousands of CFDs.
– Financing: base rate + broker margin (example +2.5%).
– Minimum deposit: typically $0–$300 depending on region.
– Typical slippage: under 1 pip on majors during active hours.
Watch out for: CFD financing and overnight costs that can add 0.5%–5.0% annually depending on position size.

5. Saxo Bank — Institutional-grade access and deep liquidity for serious traders

Saxo Bank targets serious traders with institutional-grade liquidity and wide market access. Use Saxo when you need many exchanges, larger order sizes, and advanced order types routed from TradingView. Retail account minimums commonly start at $2,000 or equivalent. Saxo offers access to 30+ global exchanges and tiered pricing for equities and other assets. Equity commissions vary widely; example ranges: $0.007–$0.02 per share on certain routes.

Choose Saxo for large accounts and multi-exchange exposure. Futures, options, and FX routes connect to deep liquidity pools. Order execution quality benefits traders placing 10,000+ share orders or large futures blocks. Platform fees and commission tiers scale with volume and account tier.

Best for: Experienced traders and wealth clients needing deep market access.
Skip if: You trade very small account sizes or need cheapest micro-lot FX pricing.
Key points:
– Minimum deposit: commonly $2,000+ for retail accounts.
– Exchanges: access to 30+ global exchanges.
– Equity commissions: example $0.007–$0.02 per share on some routes.
– Instruments: equities, FX, futures, options across many venues.
– Pricing: tiered by trading volume and account type.
Watch out for: Higher minimums and tiered pricing that may not suit micro accounts.

6. Interactive Brokers — Deep global markets and low per-share/contract fees

Interactive Brokers provides direct market access across equities, futures, options, and FX and supports TradingView via bridges. Use IB for portfolio-level trading and exchange-level execution. Per-share commissions can be as low as $0.0005–$0.005 per share on some routes. Futures fees often range $0.25–$1.00 per contract depending on venue. Account minimums may be $0 for many retail accounts, while professional or managed accounts have higher funding needs. Margin rates typically equal base rate plus a spread; example: base + 1.5%.

Use IB when you need low per-share/contract fees and access to 100+ markets. Execution quality is routed to exchanges and ECNs with typical latency under 150 ms on common routes. Platform complexity can add 10–30 minutes of setup time for API and order routing configuration. Expect a learning curve.

Best for: Multi-asset traders who need exchange-level execution and low per-share fees.
Skip if: You want a super-simple retail interface and minimal setup time.
Key points:
– Per-share commissions: $0.0005–$0.005 per share (route-dependent).
– Futures fees: commonly $0.25–$1.00 per contract.
– Market access: 100+ markets and many exchanges.
– Margin rates: base + spread (example +1.5%).
– Typical setup time: 10–30 minutes for basic API/trading bridge; longer for advanced routing.
Watch out for: Platform complexity and tiered fee structures that vary by route and volume.

Closing
Pick the broker that matches your trading tempo, instruments, and budget. Check these quick gates before you fund an account:
– Verify KYC timing: usually 1–3 business days for retail accounts.
– Test order routing with a small amount: 1–10 micro lots or 1–100 shares.
– Check live spreads on TradingView during your trading hours: note 0.0–1.2 pip ranges.
– Calculate round-turn cost: add spread + commission (example $7.00 per 100k).
– Compare funding methods: bank transfer, card, or e-wallets; expect 1–5 business days for some methods.

Test and compare. Open demo accounts when possible. Confirm instrument availability by your region. Optimize for the costs that matter most: per-trade commission, spread, or overnight financing. Trade small, measure execution, then scale to the sizes you need.